VW Vortex - Volkswagen Forum banner

I need stuff for my 16v turbo project to begin!!!

945 views 7 replies 6 participants last post by  16v 
#1 ·
I want lots of stuff-
t3 turbo
sds
Fuel rail
high flow injectors
fittings for oil pan feel line
manifold for t3 turbo
FMIC
BOV
Boost controller
Turbo timer
Downpipe
junk-
 
#2 ·
Re: I need stuff for my 16v turbo project to begin!!! (driveGTI)

I'm not sure what I'm going to do with this yet,
http://up.edu/~wsulliva/photo26.jpg
and dirty pics...... http://up.edu/~wsulliva/photo25.jpg http://up.edu/~wsulliva/photo24.jpg
it came off a ~86? 300zx with 140k miles. There is no end to end shaft play, and some side to side play. Oil and water cooled (no lines). Has nissan logo, Garrett serial number plate and other casting marks are present. No A/R is on the housing, but I figured it to be around a .48. If you really want it give me an email. I was planning on holding onto it for awhile to see what I wanted to do with it (I also have a friend that wants it) Given the rigght offer I would let it go.
 
#7 ·
Re: I need stuff for my 16v turbo project to begin!!! (driveGTI)

I have a complete setup: 16V fuel rail with Bosch 28lb injectors (good to about 285hp with 40 lbs of fuel), Bosch regulator on trick Accel swivel mount, complete 250 psi pushloc lines with fittings to bolt directly to A2 fuel lines. All new, never seen gas. email only for pics art.clemens@nashville.com
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top