VW Vortex - Volkswagen Forum banner
1 - 20 of 311 Posts

·
Registered
Joined
·
7,102 Posts
Discussion Starter · #1 · (Edited)
*** iABED : BAFFLED & KICKED OUT OIL PAN - Perfect for the track racers ***

PANS ARE IN STOCK AND READY TO SHIP!!!!
OIL PAN PRICE = $529.99 USD + SHIPPING
OEM OIL RETURN LINE = $99.99 USD + SHIPPING

If you have any questions or want to make payment via Paypal or a different method then please send me a PM.
FEATURES:

  • Kicked out design for a 0.7L capacity increase
  • TRUE aluminum hinged trap doors
  • Complete baffled design with integrated "basket" to hug the oil pump pick up tube
  • Full Aluminum construction
  • Laser cut oil pan rail from T6061
  • Full sheet aluminum for outer walls
  • (2) AN-10 oil returns . One at the front the pan and one at the rear of the oil pan. Adapters for OEM oil return lines are available.
  • Provision for OEM oil level sensor (not shown) & OEM drain plug

N.B. A reinforced plate @ the bottom of the pan is available for those who want an additional insurance against road humps,rocks,deer's etc...




[/TD]
[/TR]
[/TABLE]

Quote »

OEM OIL RETURN LINE AVAILABLE FOR:

  • K03
  • KO3S
  • K04-023

 

·
Registered
Joined
·
7,102 Posts
Discussion Starter · #3 ·
Re: (jc_bb)

Quote, originally posted by jc_bb »
what the flappy thing with the copper wire?

It will be replace with a steel pin but that is the trap door.
 

·
Registered
Joined
·
3,791 Posts
Re: *** INA - NEW FOR 2009 : Baffled & kicked out oil pan *** (velocity196)

Quote, originally posted by velocity196 »
whats the point of this mate? is there something wrong with the stocker?

To help prevent oil starvation under high or increased G load situations.
 

·
Registered
Joined
·
7,102 Posts
Discussion Starter · #7 ·
Re: FV-QR (NHKid)

Quote, originally posted by NHKid »
Does this bad-boy only fit transverse motors or will it fit longitudinal ones as well?

Only transverse.I can build one for a longitudinal set up along the same concept BUT I would prefer to do 1 off's ...not a production run.
 

·
Registered
Joined
·
6,633 Posts
Re: *** INA - NEW FOR 2009 : Baffled & kicked out oil pan *** (INA)

Sick !

Who will man up first ?
 

·
Registered
Joined
·
7,102 Posts
Discussion Starter · #14 ·
Re: *** INA - NEW FOR 2009 : Baffled & kicked out oil pan *** (ryscorewell)

Quote, originally posted by ryscorewell »
what is the height difference on these compared to a hybrid pan? i dont want to crack one of your nice new pans
http://****************.com/smile/emthup.gif

Ryan,the pan is approx 10mm shorter from pan rail to bottom in comparison to a stock 1.8T pan.
 

·
Registered
Joined
·
2,562 Posts
Re: *** INA - NEW FOR 2009 : Baffled & kicked out oil pan *** (INA)

God damn i'm swapping in a 20v to my mk2, i just really wish i had the cash to get this for it. Seriously nice looking product guys! Hopefully they'll be kicking around once i get the moneys
 

·
Registered
Joined
·
721 Posts
u should be getting a lot of response from the SEAT forums, they have been chasing u for years, man!
good stuff..
I am interested, but I need it urgently for it to appear in my photography and video session...so when u reckon your actual produxtion run will start?
 

·
Registered
Joined
·
7,102 Posts
Discussion Starter · #19 ·
Re: (robingohtt)

Quote, originally posted by robingohtt »
u should be getting a lot of response from the SEAT forums, they have been chasing u for years, man!
good stuff..
I am interested, but I need it urgently for it to appear in my photography and video session...so when u reckon your actual produxtion run will start?

email me a time frame Robin
 
1 - 20 of 311 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top