Re: Installing ABT Dual Rounds? (nikocb)
Niko,
I also did the ABT install on my car, NO modifying the radiator support, just bolt in and adjust. I did, however, have to cut the factory connectors and splice the ABT ones onto the existing wires, took about 2 hours to do the entire job, including wiring relays into the 100/130 low/high combinations (Hella upgrade), and used the inner lights as a "rally", or "fog" in the first position of my Euro switch. If you can wait a couple days (have to work all day tomorrow), I'll send you a diagram of what you need to do to make them work...
Mike
Niko,
I also did the ABT install on my car, NO modifying the radiator support, just bolt in and adjust. I did, however, have to cut the factory connectors and splice the ABT ones onto the existing wires, took about 2 hours to do the entire job, including wiring relays into the 100/130 low/high combinations (Hella upgrade), and used the inner lights as a "rally", or "fog" in the first position of my Euro switch. If you can wait a couple days (have to work all day tomorrow), I'll send you a diagram of what you need to do to make them work...
Mike
