VW Vortex - Volkswagen Forum banner
1 - 9 of 9 Posts

· Registered
Joined
·
148 Posts
Discussion Starter · #1 ·
Is it okay to run a Piper 264 Cam with the stock chip?

Currently, I'm running a Piper 264 Cam and a Garret Ver. 11 Chip on my 1998 GTI VR6. I am getting the Idle Adaptation at Limit code. My check engine light is on most of the time but occasionally resets itself. (I posted this problem here: http://forums.vwvortex.com/zerothread?id=166207 )

To troubleshoot the problem I want to temporarily swamp in the stock chip to see if the check engine light goes away.
 

· Registered
Joined
·
7,719 Posts
Re: Is it okay to run a Piper 264 Cam with the stock chip? (Anton73)

quote:[HR][/HR]I have 268 cams and I used both the GIAC v11 and the GIAC 268 cam chip. My car was faster with the regular v.11 GIAC.
[HR][/HR]​
Wow did it actually dyno with more power on the regular chip vs. the cam chip?
 

· Registered
Joined
·
792 Posts
Re: Is it okay to run a Piper 264 Cam with the stock chip? (germanrox)

quote:[HR][/HR]I have 268 cams and I used both the GIAC v11 and the GIAC 268 cam chip. My car was faster with the regular v.11 GIAC.

Wow did it actually dyno with more power on the regular chip vs. the cam chip?[HR][/HR]​
nope..1/4 mile results..
 

· Registered
Joined
·
2,698 Posts
Re: Is it okay to run a Piper 264 Cam with the stock chip? (hershey)

quote:[HR][/HR]I just bought the car so I don't know. I asked the previous owner but he didn't know either.[HR][/HR]​
Is your car ginster yellow? Bryan's old car?

Im with BillyVR6 on this one, you can run the stock chip but the garret will compliment your cams. I have Garrett v.11 software but with stock cams, never had check engine light.
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top