VW Vortex - Volkswagen Forum banner

*** Kinetic 1.8T FMIC Kit Special Pricing ***

184605 Views 190 Replies 67 Participants Last post by  CTS Turbo

725USD SHIPPED!
The Kinetic Motorsport FMIC Kit for the VW MKIV 1.8T (Golf/GTI/Jetta) is an excellent upgrade for any stock or modified cars. This kit provides significant cooling improvement compared to the competition, and substantial cooling benefits over the factory setup. Improvements can be attributed to the high density intercooler core, and cast aluminium end tanks 24x8x3" core. Each pipe in this kit has been "bead rolled" so you don't have to worry about your boost tubes blowing off or leaking. If that wasn't enough for you, this kit also uses stainless steel piping, 4ply silicon couplers and stainless steel T-Bolt clamps.
Note: If you're interested in maintaining the sleeper look, rest assured the stock bumper grilles can be installed on Golf/GTI/Jettta with minimal trimming.We use a 24x8x3" bar and plate FMIC core with 4 ply silicon couplers, our T-bolt clamps are stainless steel, and the FMIC pipes are all bling bling stainless too. The FMIC is available with black, blue or red silicon at this time.
If you have any questions post them up here, or shoot me an IM, or if you'd like to place an order feel free to do so on the online store:
Buy now at the Online Store
2003 GTi with Kinetic FMIC Kit - pic courtesy of Eric @ Flexyourhead

GT2871R Jetta with Kinetic FMIC Kit - pics courtesy of Mike Z of Unitronic





Cheers


Clay
See less See more
7
141 - 160 of 191 Posts
Because ours is bigger and has a bar and plate core, which will work better for most of our customers. If you like slow cars then you're in the wrong spot. :thumbup:
Good to know. Eurosport looks cheap anyways.
would you do this same deal for your B5 A4 1.8t setup?
Interest

hey man im interseted but i got to wait a few weeks or so to get that so email me so we can keep in touch and ill soon me a proud owner....emails [email protected]
hey man im interseted but i got to wait a few weeks or so to get that so email me so we can keep in touch and ill soon me a proud owner....emails [email protected]

Sounds good :beer::thumbup:
What if a person had a 600hp Precision IC on a 35R Turbo and was running a SEM intake --- and this combo was on a MK4 - could you accommodate the tubing in a kit form?
What if a person had a 600hp Precision IC on a 35R Turbo and was running a SEM intake --- and this combo was on a MK4 - could you accommodate the tubing in a kit form?
Piping would be different for the cold side.
Piping would be different for the cold side.
But could you handle it? If so what would it cost - please send me an PM if you have an actual quote. Thanks!
But could you handle it? If so what would it cost - please send me an PM if you have an actual quote. Thanks!
We could but we'll need to have the car here.
I emailed you clay......;)
I didn't get an email for some reason, so you'd like a FMIC kit compatible for the SEM manifold with a big FMIC kit yeah?
Clay...Issam suggests a 700hp core for my ride so I need to swap the fmic "kit" core I have for the 750hp core of the same width (24") as long as it'll fit depth and height wise. I have emailed nik many times re: the accounting error and I have no issues settling up plus adding a few bits. When he gets a chance have him call me for a CC#

Alex
Just ordered the Kinetic MK4 450hp FMIC kit.. thanks Clay it was an easy choice!!

Brett
Just ordered the Kinetic MK4 450hp FMIC kit.. thanks Clay it was an easy choice!!

Brett
Thanks for the order brett :beer:

A short clip of our fab shop and R&D bay. A glimpse of the men behind turbo kit development and fabrication. :beer:
141 - 160 of 191 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top