VW Vortex - Volkswagen Forum banner
1 - 5 of 11 Posts

· Registered
Joined
·
92 Posts
Discussion Starter · #3 ·
Re: Looking for monsoon input wiring harness (MaxxedOutMotors)

I'm replacing my headunit with a PC. I'm going to run the soundcard output to the monsoon. I know there's issues with the getting the monsoon to turn on and all that, and I know how to solve it, I would just rather not tap into the wires running from the headunit to the monsoon, I would rather just use a new plug and wire it to my soundcard.
 

· Registered
Joined
·
92 Posts
Discussion Starter · #7 ·
Re: Looking for monsoon input wiring harness (Enfig Motorsport)

Thanks for the reply Christian. I looked at your page and I can't tell which one I need from the pictures. I did a little more searching and now I'm sure I need the grey connector that plugs into the monsoon (it's the one you tap into to when followning the "monsoon with aftermarket sub" thread.) It provides the input from the HU to the monsoon.
I'll also need whatever connectors/pins go on the end of the wires inside that connector.


Modified by kbyrd at 7:27 AM 9-8-2005
 

· Registered
Joined
·
92 Posts
Discussion Starter · #11 ·
Re: Looking for monsoon input wiring harness (Enfig Motorsport)

No problem, I'm sure you're busy.
I'm pretty sure 71-9003 isn't the part I need, it plugs into the back of the head unit. I am looking for the grey connector that plugs into the Monsoon amp in the rear hatch of the Golf.
 
1 - 5 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top