[Sr. Karmann]

It's still on the CCA website.

http://www.corrado-club.com/faq/detail_faq.CFM?FAQID=88

too bad it is WRONG!!!!

Turn the MFA selector to #2 position, with ACC on, hold MFA button down, turn off ACC, then back on while still holding the MFA button. The sequence is listed in the bentley. Note, to perform test, your oil temps must be above 80 degrees, can't remember if it is in farenheight or celcius and I can let you know tomorrow if you do not have a bentley

 

[Sr. Karmann]

I do have a bentley. I looked under MFA but did not locate that section. Thanks for the tip.

91.33