[mat1t]

How did you mount it. It doesnt have any little pins that stick down on the bottom to stick into he rad support. And what did you do with the alternator.

 

[mat1t]

Re: mk1 scirroco rad in a rabbit pics. (mat1t)

Just thught I should mention its a top fill rad

 

[Autocross83gti]

Re: mk1 scirroco rad in a rabbit pics. (mat1t)

There is a top fill radiator that has pegs. I just don't remember what year. But it's from a rabbit for sure. And mounts the same way.

 

[#2172 gti 20ae]

Re: mk1 scirroco rad in a rabbit pics. (Autocross83gti)

my 1980 rabbit has a topfill radiator with no overflow http://****************.com/smile/emthup.gif

 

[Shawn B]

Re: mk1 scirroco rad in a rabbit pics. (#2172 gti 20ae)

I'm pretty sure that the rad in my rabbit now is a non-overflow rad that uses tabs at the bottom of it on each end. I have my rad bumped back (for the intercooler in front of it) and mounted above the front frame rail brace I made. There are pegs threaded into my front frame rail brace and then skateboard truck bushings slid over the pegs for the rad to sit on and then a nut threaded down to hold the rad in place.

 

[Autocross83gti]

Re: mk1 scirroco rad in a rabbit pics. (Shawn B)

Valeo 7211-01040988
1978 VW rabbit 1.5.

 

[wantacad]

Re: mk1 scirroco rad in a rabbit pics. (Autocross83gti)

Quote, originally posted by Autocross83gti »

Valeo 7211-01040988 1978 VW rabbit 1.5.

I just bought a Valeo one with pins. I bet if I looked on the box this would be the Part #.