VW Vortex - Volkswagen Forum banner
1 - 3 of 3 Posts

· Registered
Joined
·
133 Posts
Discussion Starter · #1 ·
I am looking for a pre-made mount for the master cylinder(s) in a MK2 to ditch the brake booster.
I am trying to work out the brake system for my gti and I want to be able to adjust the brake bias and I know running two masters is the best way to do this.
Thanks for your help!
 

· Registered
Joined
·
133 Posts
Discussion Starter · #3 ·
Re: Mount to Ditch the Brake Booster in a MK2? (Trevorenos)

That is a good question.
I don't really need to. I could install an manual bias adjuster into the existing brake system and pull the factory valve and I am sure get pretty close to what I am looking for. But I like the idea of being able to dial in my brake pedal stroke and pedal firmness; Its a little tougher to play with that stuff with the brake booster in the middle.
I like the idea of being able to run a balance bar setup on one master for the front brakes and one master for the rears. This might give me more adjustment for brake bias than an adjuster plumbed into the stock system.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top