VW Vortex - Volkswagen Forum banner
1 - 4 of 4 Posts

· Registered
Joined
·
20,566 Posts
Re: need help lowering (fastrabbit)

Type 3? Ahh yes, nice cars

If you are familiar with how to lower the rear end of a type 1 you got it! The type 3 has the exact same rear suspension, so you should be able to find the procedure on the net, just search for type 1. I dont know of any links to a page right now, but surely some links should be posted here later.
Basically, the rear axle or trailing arm from the spring plate, unbolt the cover at the front end of the spring plate and then tap the spring plate outwards. CAUTION! The spring plate will spring down about 2" when it is pressed out. Then you just adjust the spring plate in the splines of the torsion bar ad reinstall.
 

· Registered
Joined
·
5,930 Posts
Re: need help lowering (PerL)

quote:[HR][/HR]...anything non-Audi is just complete crap. Porsche, BMW, Ferrari, Lambo, Nissan, etc.
can't compete with the almighty Audi. It doesn't even matter if it is a car or not.
Airplanes, oil tankers, escalators, elevators, pens, soda, etc. If it isn't blessed by Audi, its garbage[HR][/HR]​
that's a pretty bold sig for a VW forum (cough cough.. VWVortex)
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top