VW Vortex - Volkswagen Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
292 Posts
I also posted in the Golf V forum with no luck so trying others with hope of getting a response.

I just installed the Valeo LED tails in my 2007 GTI. I used the ECS adapters (did not run 4th wire) and did not run the rear fog wire. I have an OEM Euro switch installed.

I used the following coding in Central Electronics Module long coding, bits 9 through 13:

00 00 00 0F 00

The lights work fine with amber turns, brake light function and no BOW on the dash.

However when I turn the "headlight" switch to the on position the rear lights do not light up. But the brake and turn signals work fine. Basically I can't drive at night.

Anyone have any idea how to resolve this?

Thanks for any help.
 

·
Registered
Joined
·
292 Posts
Thanks for all the replies and feedback.

I will certainly try Marek's suggestions on the coding. However I won't be able to do this for several weeks since I am overseas on a business trip.

I will report back after attempting the changes.

Please post any additional recommendations or learnings for installing these LEDs.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top