VW Vortex - Volkswagen Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
656 Posts
Re: OEM LED Installation (jimb)

I had the whole thing going without the additional wire you're talking about, and I have no "bulb out" message. but again I have the middle lights as the parking lights and the outer as turn signals in amber, what do you have as parking lights?
 

·
Registered
Joined
·
656 Posts
Re: OEM LED Installation (barnstee)

what I did is just kept the common in place and moved the other 2 pins one slot down, if I remember right on the left it was 2 to 3 and 3 to 4, and on the right it was 3 to 2 and 2 to 1, plus I used the coding that I found on the vortex to disable cold diagnostics and activate rear fog and the amber turn signal, if you need more details IM me
 

·
Registered
Joined
·
656 Posts
Re: OEM LED Installation (Eurofan4eva)

Quote, originally posted by Eurofan4eva »
Has anyone put in the OEM LED tails in a GTI/R32 and have them work w/o throwing a code? TIA

yea I did
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top