VW Vortex - Volkswagen Forum banner
1 - 1 of 2 Posts

· Registered
12,088 Posts
Re: Oil pressure gauge sender (darkstar91141)

You'll need an M10x1 - 1/8" NPT adaptor. You have two choices for location. Your first choice is the blank plug on the top of the oil filter flange. Using the adaptor I mentioned above, you remove the hex plug and install your sender. You may have to unbolt the bracket which holds the engine speed sensor.
Your other option is to use a relocation kit. Our 1/8" NPT relocation kit will allow you to install the Autometer sender and the OEM sender in the OEM location. The adaptor method will cost you $6, where as the relo kit will cost you $24. Your call, based on how you feel about working with the blank plug or the OEM sender.
1 - 1 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.