VW Vortex - Volkswagen Forum banner
1 - 8 of 8 Posts

· Registered
Joined
·
10,854 Posts
Discussion Starter · #1 ·
I searched, and Im still unsure as to which pads I need to get. in '86, there is a production change, and Im not sure if it would matter or not. It appears the production changes has to do with the wear sensor. Is this correct? I just want to be sure before I order from TireRack.
BTW, these are going on a Mk2 16v with Corrado G60 hubs and 11" front 4x100 rotors.

Thanks,
Steve


Modified by Scuba2001 at 10:51 PM 8-25-2006
 

· Registered
Joined
·
10,854 Posts
Discussion Starter · #3 ·
Someone must know something...
I got my rotors and pads in from an online vendor, and the pads are .75" short of touching the carriers' side. I ordered PBR/Axxis Ultimate pads, part# D362RU.
Thanks
 

· Registered
Joined
·
10,854 Posts
Discussion Starter · #6 ·
Re: (Trixy)

Quote, originally posted by Trixy »
im sent
They may have sent you g54 pads
those
vendors

Thanks for the IM, Im going to confirm that they're Girling 54, Corrado G60 pads this afternoon. I have a caliper and carrier to mess with, so I'll double check.
Here's another angel how how off the pads are.
 

· Registered
Joined
·
10,854 Posts
Discussion Starter · #7 ·
I think I have found the correct pads. If someone could please confirm, I would greatly appreciate it...
If you have Girling 60's on your car, do your pads look like this:
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top