VW Vortex - Volkswagen Forum banner

1 - 20 of 28 Posts

·
Registered
Joined
·
21 Posts
Discussion Starter #1
Did not notice a thread on modified CCs......post pics if you got em...if there was already a thread then nevermind.
 

·
Registered
Joined
·
1,656 Posts
now just pics cause I'm bored
H&R spring and Helios

Q7 wheels and I'm guessing coils

20" and bags

20" and coils

MRR's and coils

MRR's and bags
 

·
Registered
Joined
·
55 Posts
Re: (passat_98)

simple wheels swap
.

.
& A P-shop of things to come.
.

.
2/3rds the way there. just need tires & susp. now!
.

.
20x8.5 et35 (no stagger ,just swagger)

Modified by SCOTTI3 B33 at 2:39 PM 6-3-2009


Modified by SCOTTI3 B33 at 2:39 PM 6-3-2009
 

·
Registered
Joined
·
90 Posts
Re: (Tourenwagen)

Quote, originally posted by Tourenwagen »
^ sick! did you plasti-dip the front?

BMW Shadowline vinyl, x-acto knife and a boatload of patience...
 

·
Registered
Joined
·
117 Posts
Re: (deville)

How hard was applying the shadowline film to the chrome strips on the side? Did you have to pull them?
 

·
Registered
Joined
·
90 Posts
Re: (frybel)

Quote, originally posted by frybel »
How hard was applying the shadowline film to the chrome strips on the side? Did you have to pull them?

Those were the easiest - no curves. The rear section by the tail lights and the grill were done in sections. Which works out OK as you can hardly tell when you overlap the tape - it's very good stuff.
 

·
Registered
Joined
·
117 Posts
Re: (deville)

Awesome. Just ordered 30' of it this morning, hopefully it'll be here in time for a weekend project

On the bumper, you said you did it in sections, did you pull the strips off the car to do it or just work with them still attached?
 

·
Registered
Joined
·
90 Posts
Re: (frybel)

Still attached. Did the rear in 5 parts - 2 on each curve, then the middle section was one piece.
Also, the strip comes 3" wide - the side moldings are only 1.25" wide, so you can split the tape down the middle and get twice as much use out of it.


Modified by deville at 9:56 AM 6-8-2009
 

·
Registered
Joined
·
90 Posts
Re: (deville)

2 more photos... the second one makes it appear as if there's a huge gap between the arch and the wheel - there's isn't. It's sitting stock for now, but the 1.5" drop from some H&R springs will be going on soon. As seen in the other posts, the drop is nice without being too radical.

 
1 - 20 of 28 Posts
Top