Joined
·
13,492 Posts
Re: (32176G60)
Busy doing NADA...
| Quote, originally posted by 32176G60 » |
| What have you been up to? |
Busy doing NADA...
Posts by Issam Abed
1 - 14 of 14 Posts
Joined
·
13,492 Posts
Re: (sdezego)
Now imagine that + your G60.Thats going to be one Corrado that I would love to take for a spin.
Btw nice desktop:
![]()
| Quote, originally posted by sdezego » |
I heard that Nate Romero ended up getting 240whp on his all motor 2020 
|
Now imagine that + your G60.Thats going to be one Corrado that I would love to take for a spin.
Btw nice desktop:
Joined
·
13,492 Posts
Re: (sdezego)
Shawn what valves are you using?And where are the updates!?
Shawn what valves are you using?And where are the updates!?
Joined
·
13,492 Posts
Re: (sdezego)
There are 2 @ the rear.I would imagine they both have the same oil pressure correct?
| Quote, originally posted by sdezego » |
| or off of the side if the head. |
There are 2 @ the rear.I would imagine they both have the same oil pressure correct?
Joined
·
13,492 Posts
Re: Project Build: sc2020 (sdezego)
Build a G60 bracket for it!
![]()
| Quote, originally posted by sdezego » |
...along with some extra parts like a whole AWP
|
Build a G60 bracket for it!
Joined
·
13,492 Posts
Re: (sdezego)
Anymore funds Shawn?
![]()
| Quote, originally posted by sdezego » |
LOL. Fear not, the pace will pick up as long as the funds do 
|
Anymore funds Shawn?
Joined
·
13,492 Posts
Re: Project Build: sc2020 (sdezego)
Shawn I believe thats the principle of the Dutch dub kit:
![]()
![]()
http://www.dutchdub.com/Webnew/O2M/o2mmount.htm
| Quote, originally posted by sdezego » |
| ...and for the naysayers that you can properly mount the 02m w/o moving the rear trans Subframe mount cup, sorry, but you are wrong. The Cup MUST be moved back (1/4-1/2") to clear the CV or else your engine will have to be cocked. |
Shawn I believe thats the principle of the Dutch dub kit:
http://www.dutchdub.com/Webnew/O2M/o2mmount.htm
Joined
·
13,492 Posts
Re: (natek102)
FIXED!
| Quote, originally posted by natek102 » |
that bracket looks sweet shawn! were did you get an idea like that?
|
FIXED!
Joined
·
13,492 Posts
Re: (d-bot)
@ the rate I am going I should have YOU build my headers
![]()
| Quote, originally posted by d-bot » |
ROFL. surprise!
|
@ the rate I am going I should have YOU build my headers
Joined
·
13,492 Posts
Re: FV-QR (sdezego)
Looks good Shawn!
![]()
Looks good Shawn!
Joined
·
13,492 Posts
Re: FV-QR (sdezego)
Shawn
Techtonics has 20V headers incase you did not know
![]()
Shawn
Techtonics has 20V headers incase you did not know
Joined
·
13,492 Posts
Re: FV-QR (sdezego)
It is a long tube design similar to there 16V kit.
It is not on the website but if you ask for Josh he will accomodate you.
| Quote, originally posted by sdezego » |
No Doubt! I did not know, but that provides an alternative should I get lazy or antsy at the last minute
Do you know if it is a long tube race design or has a flex section? |
It is not on the website but if you ask for Josh he will accomodate you.
Joined
·
13,492 Posts
:thumbup:
Joined
·
13,492 Posts
And the spacing of the ports are different.
Regardless :thumbup::thumbup: to you!
Have not posted in a long time so it was refreshing to come back and see the OG still at it.
1 - 14 of 14 Posts
Join the discussion
