VW Vortex - Volkswagen Forum banner
Cancel

Question for all you body work and electrical guru's out there....

377 Views 8 Replies 5 Participants Last post by  blackoutA3, 
B
Just need a little info for my spring project... Any info or help would be greatly appreciated....
1. How much should I expect to pay to have my NA Stock front bumper smoothed/shaved and painted (all except the bumper line), so the turns/dummy area & the bumper side marker area all smoothed and a bumper respray... estimated cost? I haven't gotten any quotes from any body shops yet. I was just curious, what I should expect to pay?
2. Do the mk4 style lights have a built in turn signals? If so, is it easy to wire?
thanks in advance
mike http://****************.com/smile/emthup.gif
See less See more
2
Reply
Save
Like
1 - 9 of 9 Posts
G
Re: Question for all you body work and electrical guru's out there.... (blackoutA3)

300-500ish bucks maybe???
And yes it's easy... http://****************.com/smile/emthup.gif
See less See more
Reply
Save
Like
Gaki
Re: Question for all you body work and electrical guru's out there.... (Ghetto-8v)

quote:[HR][/HR]300-500ish bucks maybe???
And yes it's easy... http://****************.com/smile/emthup.gif [HR][/HR]​
im guessing around that area.
The only problem that I have found with wiring the mk4 turn sigs is the fact that most people end up having the honda flashers. The bulbs inside the signals dont produce as much of a load on the system as the regular sigs do.
*note*... last week i had a Honda left turn sig. It was funnier than heck.. but I was too embarassed to turn left
. A burned out lightbulb sucks



[Modified by Gaki, 12:08 AM 2-6-2002]
See less See more
3
Reply
Save
Like
B
Re: Question for all you body work and electrical guru's out there.... (Gaki)

damn you folks are quick
having the honda hyperblink won't bother me that much....
300-500 sounds about right... another question... I have a set of kamei air ducts should i have those molded in or just have it smoove? just need some opinions AND PICS if anyone has some... thanks again...
See less See more
3
Reply
Save
Like
Gaki
Re: Question for all you body work and electrical guru's out there.... (blackoutA3)

look up bluevr.. hes part of Dasfuls and has the kameis molded in.
Reply
Save
Like
N
Re: Question for all you body work and electrical guru's out there.... (Gaki)

Smoth it looks much better and cleaner http://****************.com/smile/emthup.gif
See less See more
Reply
Save
Like
B
Re: Question for all you body work and electrical guru's out there.... (blackoutA3)

i tried a search but couldn't find any pics
... i'm looking for a ride w/a smoothed bumper, mk4 look lights, and a kamei grill... i know someone out there has a pic of this setup... if you do... post it please
See less See more
2
Reply
Save
Like
B
Re: Question for all you body work and electrical guru's out there.... (blackoutA3)

here is the kamei molded in..

and here is flushed bumper..

quote:[HR][/HR]The only problem that I have found with wiring the mk4 turn sigs is the fact that most people end up having the honda flashers. The bulbs inside the signals dont produce as much of a load on the system as the regular sigs do.
[HR][/HR]​
oh there is a higher watt bulb for the small bulb.. i have a set.. here is the pic

See less See more
4
Reply
Save
Like
B
Re: Question for all you body work and electrical guru's out there.... (BlueVR)

BlueVr thanks for the pics and the info..... btw you ride is one of the tightest on the vortex.....
See less See more
Reply
Save
Like
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
VW Vortex - Volkswagen Forum
A forum community dedicated to all Volkswagen owners and enthusiasts. Come join the discussion about performance, builds, modifications, classifieds, troubleshooting, maintenance, new releases, and more!
Full Forum Listing
Explore Our Forums
The Car Lounge Golf IV & Jetta IV Golf III & Jetta III Golf II & Jetta II Golf IV/Jetta IV Parts
Top