VW Vortex - Volkswagen Forum banner
1 - 10 of 10 Posts

·
Registered
Joined
·
424 Posts
Discussion Starter · #1 ·
which H&R spacers I need to have my 18X8 et35 wheels flush with the fenders? I have Jetta IV with H&R/Bilstein. thanks much!! http://****************.com/smile/emthup.gif
 

·
Registered
Joined
·
424 Posts
Discussion Starter · #2 ·
Re: question: what f/r SPACERS to use for 18x8 et35 on Jetta IV? (jemmy)

ttt
I appreciate the help from somebody with the knowledge or having the same setup thanks!
 

·
Registered
Joined
·
424 Posts
Discussion Starter · #4 ·
Re: question: what f/r SPACERS to use for 18x8 et35 on Jetta IV? (Max Rebo)

Max Rebo, 8-10mm front or rear?
my guess right now is 5mm front, 15 mm rear but I want to ask people's opinion especially ones with the experience and same setup. anybody?
 

·
Registered
Joined
·
7,213 Posts
Re: question: what f/r SPACERS to use for 18x8 et35 on Jetta IV? (Jman5000)

You might want to go a bit higher in the rear - 15 possibly. I have 10mm extra on my 17x8 rears and they could stand to be out a bit more...
QuickStick I think has 20mm extra in back on 17x8's and his look good too...
It's hard to say...
 

·
Registered
Joined
·
14,713 Posts
Re: question: what f/r SPACERS to use for 18x8 et35 on Jetta IV? (jemmy)

Try it out . . . if it doesn't work, then sell 'em and buy another size. http://****************.com/smile/emthup.gif
 

·
Registered
Joined
·
7,213 Posts
Re: question: what f/r SPACERS to use for 18x8 et35 on Jetta IV? (jemmy)

I am hopefully going to take some better pictures of my lower offset stuff in the next couple of days. If you can wait I will show you 5mm fronts and 10mm rears on 8 inch wide wheels...
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top