VW Vortex - Volkswagen Forum banner
1 - 1 of 53 Posts

· Registered
53 Posts
As others have said:
1. Volvo rear license plate bracket
2. Well Nuts
3. 10-32 stainless screws

You pick the size well nuts and screws. Here are examples. See post 33 below.

MEASURE 4 TIMES- then drill holes. Be sure you have proper spacing to center plate horizontally and vertically.
I used painter tape to cover bumper when drilling



I am going to have my detailer put this on - how will he know what size holes to drill?
1 - 1 of 53 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.