VW Vortex - Volkswagen Forum banner
1 - 1 of 5 Posts

· Registered
1,429 Posts
Re: Rear Wheel bearings on disc brake cars... (vdubturbo)

YO! nothin' to it. You just cleaning and repacking the bearings or replacing them? Buy new grease seals (national brand #1962) and if you need bearings the numbers are A-15 for the inners (2 required) and A-1 for the outers (2 required) (BCA brand #'s and come with new races). Get new cotter pins (1/8" x 2" will work), too. And grease of course. Races can be removed and reinstalled easily with a race driver (see parts store). Make sure you get the races fully seated. Read the bently to figure out correct bearing tension when reassembling.
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.