Re: Reverse lights (nuemerik)
Put the jack stands away man.
The reverse light switch is on top of the tranny. Look straight down by the linkages, see that black plastic housing with the connector on it? That's it. Two bolts holding it on.
Depending on the car you should have a blakc plastic housing with a momentary push switch attached.
My car is a 90 G-60 with a manufacture date of 4/90. I could open up the switch portion of mine and clean the contacts, worked fine after.
PoweredbyG60's 90 has a date of 10/89, but has a newer switch. His screwed into the housing and was completely sealed. About $14 from the dealer.
Of course, check the fuse first like G60nut said, a lot easier.
Hope this helps.
Put the jack stands away man.
The reverse light switch is on top of the tranny. Look straight down by the linkages, see that black plastic housing with the connector on it? That's it. Two bolts holding it on.
Depending on the car you should have a blakc plastic housing with a momentary push switch attached.
My car is a 90 G-60 with a manufacture date of 4/90. I could open up the switch portion of mine and clean the contacts, worked fine after.
PoweredbyG60's 90 has a date of 10/89, but has a newer switch. His screwed into the housing and was completely sealed. About $14 from the dealer.
Of course, check the fuse first like G60nut said, a lot easier.
Hope this helps.
