VW Vortex - Volkswagen Forum banner
1 - 20 of 21 Posts

· Registered
Joined
·
1,664 Posts
Re: SIDE EXIT EXHAUST ON GTI (mirza1.8t)

your serious about the side exit exhaust? no one makes a 'kit' yet, but Bug_Power was making one for his bug.
btw.. you should come to our GTG tomorrow night (sat, 2/9) 8 pm at Krispy Kreme in the AZ Mills parking lot. Should be about 30 dubs there.
Check the SW forum for more info.
 

· Registered
Joined
·
1,664 Posts
Re: SIDE EXIT EXHAUST ON GTI (mirza1.8t)

Well, KK is hosting us tomorrow night, so I dont think we will be asked to leave. Not sure how long we will be there.. a couple of hours or so.
Also, to have one made... not sure. You know that it will be silly loud, right?
 

· Registered
Joined
·
1,664 Posts
Re: SIDE EXIT EXHAUST ON GTI (mirza1.8t)

quote:[HR][/HR]I don't mind, at least it'll scare the Hondas.
[HR][/HR]​
If you do it right, you could scare mustangs instead of Hondas

Check the 1/4 mile time in my sig. That was done with 3 power mods.. chip, intake and exhaust. Drag radials and coil overs got the power to the ground.
quote:[HR][/HR]I'll have mine done next month 3" stainless all the way into twin 2.5 tips out of the side.
Will include Hi flow cat and 3" race muffler...shhhhh but not too much
[HR][/HR]​
Where are you putting the race muffler at?
 

· Registered
Joined
·
86 Posts
Discussion Starter · #12 ·
Re: SIDE EXIT EXHAUST ON GTI (QkShift)

This is a beatifull beast, I hope to at least make mine look like that someday. I like the side exhaust, but i'd like mine a little more civilized, instead of hanging out that far.
 

· Registered
Joined
·
3,311 Posts
Re: SIDE EXIT EXHAUST ON GTI (DaBlackJetta)

Where the resinator used to sit it's only either 5" or 6" diameter (round )depending on which one i go with. I looked at a 5" seems to fit in there pretty good. Only problem I have is the maganaflow which I want has both a 3.5" inlet and outlet
Kinda like this

Still palnning it, should work though
 

· Registered
Joined
·
86 Posts
Discussion Starter · #16 ·
Re: SIDE EXIT EXHAUST ON GTI (FYGTBUG)

quote:[HR][/HR]Where the resinator used to sit it's only either 5" or 6" diameter (round )depending on which one i go with. I looked at a 5" seems to fit in there pretty good. Only problem I have is the maganaflow which I want has both a 3.5" inlet and outlet
Kinda like this

Still palnning it, should work though[HR][/HR]​
I'm planning on a dual setup and having it come out both sides, I think it'll look more complete **** this.
 

· Registered
Joined
·
1,387 Posts
Re: SIDE EXIT EXHAUST ON GTI (yoVWmon)

Have you guys ever seen the Exhaust for the Dahlback "GTI"? The resonator/muffler is the size of a beer keg and sits inside where the whole back seat would be.
that's why the exit sits so high in the car. I would like to see an exhaust come out of the side, but on a real car that's lowered and maybe even side skirts.
 

· Registered
Joined
·
633 Posts
Re: SIDE EXIT EXHAUST ON GTI (yoVWmon)

I've seen the DBR-Golf a couple of times and i'm telling you, it's off the chart..
best ET so far: 10.70 (broke the gearbox in the end..)
est. ET (when everything works..) : high 9..
hehe.. it brings respect where ever it goes..
 
1 - 20 of 21 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top