VW Vortex - Volkswagen Forum banner
1 - 11 of 11 Posts

·
Banned
Joined
·
9,489 Posts
Re: Source for 1.8T engines/trans (bobqzzi)

Careful, I think the 1.8t axle flanges are smaller than the GTI, but good news is ( I think) that 02a MK3 or 2 axles bolt up if you're doing a swap into an mk2 or 3.


Modified by reflexbug at 9:19 PM 12-17-2003
 

·
Registered
Joined
·
827 Posts
Re: Source for 1.8T engines/trans (reflexbug)

1.8T 02J has 109mm axle flanges. butyou can install the 100mm flanges from the 2.0 02J transmission, they bolt right on. which means they will bolt to 16v 100mm flanges. you can buy them at the dealer.
 

·
Registered
Joined
·
20,016 Posts
Re: Source for 1.8T engines/trans (bobqzzi)

Quote, originally posted by bobqzzi »
anyone? There must be a secret yard where they sell thses things for $100.00 each!

you're dreaming. junkyard owners might act stupid, but they all know what they have and what it's worth, more or less. I know of a good junkyard, but the 20v motors they get are not very frequent. They have none now.
 

·
Registered
Joined
·
20,016 Posts
Re: Source for 1.8T engines/trans (bobqzzi)

just about any dismantler with large numbers of VWs is hit-or-miss, when it comes to good, full packages in their inventory. Try these guys:
http://www.autobahndismantlers.com/
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top