The Secret to Making a Euro VR6 lip fit....

1634 Views 35 Replies 29 Participants Last post by vento_vr6_dohc, Feb 9, 2002

EuroStyle

Discussion Starter · Feb 6, 2002

11

Get euro bumpers!!

Well, after a good deal of waiting, I finally have the front smooth top euro bumper on. I also installed the euro blinkers, euro splash guards, VR6 lip and euro rebar, but not the euro rad support...I have all this stuff sitting around and we got an unexpected winter thaw so I thought I would throw the front on, but it was too cold to start draining the radiator etc. Of course, by the time I had the front bumper sprayed and was ready to install it the temp was below 30* again, but I'll warm up again...eventually. I have to have the rear sprayed soon so this time when we get a warm day I will be ready to put it on. I still am awaiting the lower grills and fogs, but for now I am happy. Here are some pics of the job, I will have some more of the finished product this weekend...
Sean

The guys feaked when I pulled up to the [a/k] meeting like this...

[Modified by EuroStyle, 11:05 PM 2-5-2002]

See less See more

1 - 20 of 36 Posts

STEALTHDEMONDUB

· #2 · Feb 6, 2002

3

Re: The Secret to Making a Euro VR6 lip fit.... (EuroStyle)

sounds good... everything is looking nice sean http://****************.com/smile/emthup.gif

keep posting updates

See less See more

BlackieVR6

· #3 · Feb 6, 2002

Re: The Secret to Making a Euro VR6 lip fit.... (STEALTHDEMONDUB)

Tres excellante

Mojoban

· #4 · Feb 6, 2002

Re: The Secret to Making a Euro VR6 lip fit.... (STEALTHDEMONDUB)

Perfect!

next

· #5 · Feb 6, 2002

2

Re: The Secret to Making a Euro VR6 lip fit.... (EuroStyle)

I hate u, I want euro bumper so much...
heheh good job, what kind of fog are u getting for the bumper?
how about french yellow fog

http://****************.com/smile/emthup.gif

See less See more

PzwoTDI

· #6 · Feb 6, 2002

2

Re: The Secret to Making a Euro VR6 lip fit.... (next)

http://****************.com/smile/emthup.gif http://****************.com/smile/emthup.gif ...Eurostyle,your car is mos def one of my favs on here!

See less See more

EuroStyle

Discussion Starter · #7 · Feb 6, 2002

Re: The Secret to Making a Euro VR6 lip fit.... (next)

I am doing the Hella long fogs, and I will run yellow bubls like I did in the stock ones.....
Sean

HavocRacingVW

· #8 · Feb 6, 2002

Re: The Secret to Making a Euro VR6 lip fit.... (EuroStyle)

I am partial to texured euro bumpers but i like it. Looks good

VWLiz

· #9 · Feb 6, 2002

Re: The Secret to Making a Euro VR6 lip fit.... (EuroStyle)

Are the Euro bumpers slightly smaller than the NA bumpers, because the Euro lip looks bigger??

chrisreg

· #10 · Feb 6, 2002

3

Re: The Secret to Making a Euro VR6 lip fit.... (EuroStyle)

quote:[HR][/HR]

[HR][/HR]

ah I need some money

looks good though man http://****************.com/smile/emthup.gif

See less See more

BiH

· #11 · Feb 6, 2002

Re: The Secret to Making a Euro VR6 lip fit.... (whitejettaglx)

quote:[HR][/HR]Are the Euro bumpers slightly smaller than the NA bumpers, because the Euro lip looks bigger??[HR][/HR]

yes they are, that's why they can't pass the crash test here and be DOT or whatever else aproved. Also the euro rebar is different, I think it's made partily out of plastic or sutmin like that. Looks great.

Grandma Higgins

· #12 · Feb 6, 2002

Re: The Secret to Making a Euro VR6 lip fit.... (whitejettaglx)

quote:[HR][/HR]Are the Euro bumpers slightly smaller than the NA bumpers, because the Euro lip looks bigger??[HR][/HR]

not only are the euro bumpers smaller, but the euro vr6 lip is larger!

See less See more

snuffyboy3

· #13 · Feb 6, 2002

4

Re: The Secret to Making a Euro VR6 lip fit.... (EuroStyle)

...Damn u and ur nice a$$ car... http://****************.com/smile/emthup.gif

...i want a euro lip...the cars lookin real good...keep up the good work...ur really living up to the name "EuroStyle"... http://****************.com/smile/emthup.gif
[edit] that euro lip does look bigger, and better...can that fit onto a NA bumper?...if i could get it to look like that then its worth going down my driveway backwards just to have it...

[Modified by snuffyboy3, 4:43 AM 2-6-2002]

See less See more

Youngdubber4

· #14 · Feb 6, 2002

Re: The Secret to Making a Euro VR6 lip fit.... (snuffyboy3)

AAAAAAAAA I just came in my pants. That is just how I want my front end to look.but with textured tops...and either smoked E-codes or smoked mk4's
but still same deal...SEXY

Fly952.0

· #15 · Feb 6, 2002

Re: The Secret to Making a Euro VR6 lip fit.... (BiH)

Very nice Sean http://****************.com/smile/emthup.gif Can I ask you where you sourced the smooth tops?

See less See more

Vento 3

· #16 · Feb 6, 2002

2

Re: The Secret to Making a Euro VR6 lip fit.... (EuroStyle)

quote:[HR][/HR]

[HR][/HR]

is that the diff between NA and Euro bumper?

looks like too much....

See less See more

macksks

· #17 · Feb 6, 2002

Re: The Secret to Making a Euro VR6 lip fit.... (EuroStyle)

quote:[HR][/HR]

[HR][/HR]

Johnny 5 is ALIVE!

See less See more

DJ Appa

· #18 · Feb 6, 2002

Re: The Secret to Making a Euro VR6 lip fit.... (EuroStyle)

hmmmmmmmm looks like a bug under da cover how bout gettin a pic of that up in hear
bumper looks real tight will you have the lights in in time for fmft

[Modified by mk1rocco80, 2:13 AM 2-6-2002]

See less See more

III

· #19 · Feb 6, 2002

Re: The Secret to Making a Euro VR6 lip fit.... (mk1rocco80)

aah!! i want it!! http://****************.com/smile/emthup.gif

See less See more

1lowVento

· #20 · Feb 6, 2002

2

Re: The Secret to Making a Euro VR6 lip fit.... (4NRYDE)

looking good bro http://****************.com/smile/emthup.gif http://****************.com/smile/emthup.gif

See less See more

1 - 20 of 36 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.