VW Vortex - Volkswagen Forum banner
1 - 4 of 4 Posts

· Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
I have a 2009 B6 VW Passat R-Line estate and I have seen differing torque settings on forums and the Haynes manual and would appreciate it if anyone has the "definitive" settings?
I am interested in all of the settings particularly the 21mm bolt and slide bolts.

Thanks in advance..
 

· Registered
Joined
·
3,731 Posts
This is from the Mk5 Bentley manual, and since B6 and Mk5 are so similar I'm pretty confident it applies.

Caliper carrier bolts - 140 ft lbs, clean if reusing.
Caliper guide pins - 22 ft lbs. lubricate when installing.

Those should be the only ones you'd disturb to do a front brake job.

Steve
 

· Registered
Joined
·
2 Posts
Discussion Starter · #3 ·
Thanks Steve. I was confused because I watched a video by Autodoc for a B6 posted 2 years ago that specified 75nm and I have a Haynes manual for Passat B6 that states 200nm for the carrier bolts.
Maurice
 

· Registered
Joined
·
1,964 Posts
Hope I shared correctly

Sent from a telegraph
 
1 - 4 of 4 Posts
Top