VW Vortex - Volkswagen Forum banner
1 - 10 of 10 Posts

· Registered
Joined
·
849 Posts
Re: Tranny Mount bolt sizes (4R32)

Quote, originally posted by 4R32 »
Does anyone know the OEM bolt head sizes for the tranny mount?
Thanks in advance.

As in the size in which a socket would fit? If so, there are two sizes; don't remember specifically, but along the lines of a 13mm AND a 16mm
 

· Registered
Joined
·
849 Posts
Re: Tranny Mount bolt sizes (jayo)

Sorry, the manual doesn't specify the socket sizes needed. But if someone else doesn't chime in here before I get back to you, I'll gladly check when I get home and post back here.
 

· Registered
Joined
·
849 Posts
Re: Tranny Mount bolt sizes (Daemon42)

Quote, originally posted by Daemon42 »
This post http://forums.vwvortex.com/zer...72812
suggests 2 13mm's and 2 16mm's.
ian

HA! My memory served me correct!

I swear that the tranny mount is the easiest mod on the R!! Right behind the stubby antenna, of course

Edit: Oh! And the torque specs are as follows:
13mm bolts (to subframe) = 25nm
16mm bolts (to tranny) = 50nm
Good luck!


Modified by jayo at 4:06 PM 11-15-2004
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top