low 15's, close to a 15 flat, with good traction. Depends on the driver. Stock VR6's will run mid 15's or so...
1 - 16 of 16 Posts
Re: vr6 1/4 mile question (Steve22)
me
![]()
![]()
![]()
http://****************.com/smile/emthup.gif
me
4
Re: vr6 1/4 mile question (feeling_sinister)
See Sig.
Intake, exhaust, Neuspeed Chip, street tires.
http://****************.com/smile/emthup.gif
See Sig.
Intake, exhaust, Neuspeed Chip, street tires.
http://****************.com/smile/emthup.gif
Re: vr6 1/4 mile question (JimGTIVR6)
quote:[HR][/HR]What kind of times could you expect out of a chipped vr6 w/aftermarket exhaust, intake, and header?
i have a garret chip, intake w/sheild and brospeed exhaust.
I ran a [email protected] with those mods on stock suspension and tires. [HR][/HR]
thats impressive http://****************.com/smile/emthup.gifi have a garret chip, intake w/sheild and brospeed exhaust.
I ran a [email protected] with those mods on stock suspension and tires. [HR][/HR]
Re: vr6 1/4 mile question (VR6BOPER)
![]()
DUDE some stuck a Tenzo R muffler on your car !!!!!!
![]()
i would get a magnaflow with dual tips and paint ur calipers black not yellow
other than that -- very nice ---- love the color
love the shaved REAR ---- nice and smooth
[Modified by VRsixVW, 2:48 PM 2-11-2002]
[Modified by VRsixVW, 2:49 PM 2-11-2002]
quote:[HR][/HR]See Sig.
Intake, exhaust, Neuspeed Chip, street tires.
http://****************.com/smile/emthup.gif
[HR][/HR]
what kinda exhaust is that ????Intake, exhaust, Neuspeed Chip, street tires.
http://****************.com/smile/emthup.gif
[HR][/HR]
DUDE some stuck a Tenzo R muffler on your car !!!!!!
i would get a magnaflow with dual tips and paint ur calipers black not yellow
other than that -- very nice ---- love the color
love the shaved REAR ---- nice and smooth
[Modified by VRsixVW, 2:48 PM 2-11-2002]
[Modified by VRsixVW, 2:49 PM 2-11-2002]
3
Re: vr6 1/4 mile question (Majik6)
I agree, I don't like the muffler anymore. It was an idea I had about 4 years ago, and I drew it up on AutoCad. So, my buddy with the stainless steel shop did it up for me. I put it on, and thought............
![]()
That's a little big!
Anyway it's coming off this season in place of a straight side exit pipe, which will be cut on a slant coming out the driver's side!
It doesn't look as bad in person, as it does in the picture.
http://****************.com/smile/emthup.gif
I agree, I don't like the muffler anymore. It was an idea I had about 4 years ago, and I drew it up on AutoCad. So, my buddy with the stainless steel shop did it up for me. I put it on, and thought............
Anyway it's coming off this season in place of a straight side exit pipe, which will be cut on a slant coming out the driver's side!
It doesn't look as bad in person, as it does in the picture.
http://****************.com/smile/emthup.gif
2
Re: vr6 1/4 mile question (JimGTIVR6)
My Passat ran a 15.7 @ 93.2 with a nospeed chip and 9" pflo. You mk3'ers better be quicker than 15.2 with the same setup!!!
![]()
![]()
quote:[HR][/HR]
i have a garret chip, intake w/sheild and brospeed exhaust.
I ran a [email protected] with those mods on stock suspension and tires. [HR][/HR]
Obviously with a bit of weight reduction too? Or were you runing full interiour?i have a garret chip, intake w/sheild and brospeed exhaust.
I ran a [email protected] with those mods on stock suspension and tires. [HR][/HR]
My Passat ran a 15.7 @ 93.2 with a nospeed chip and 9" pflo. You mk3'ers better be quicker than 15.2 with the same setup!!!
2
1 - 16 of 16 Posts
