VW Vortex - Volkswagen Forum banner

What do you think?

923 Views 24 Replies 13 Participants Last post by  83Rabbit
Sorry for the poor picture quality, I just got my new camera and its already dark. This is my ghetto bunny project, trying to spend as little as possible...
So far the she's got a tilt/slide sunroof, cowl induction (hehehe), early fenders, hacked up 80' grill, eurovan lights, battery relocated to the trunk, and stripped interior. Once all the body work is done, I'll probably just spray her in black primer till I finish everything else. Working on a 2L turbo motor for her.... oh boy.





[Modified by sirhcorrado, 7:03 PM 11-24-2001]
See less See more
2
1 - 20 of 25 Posts
Re: What do you think? (sirhcorrado)

Looks like you lost the wheels somewhere...
Love the lights.
See less See more
Re: What do you think? (sirhcorrado)

Sounds like it will be nice. What was involved in making the sunroof work?
Re: What do you think? (85gti1)

Nice lights http://****************.com/smile/emthup.gif http://****************.com/smile/emthup.gif
See less See more
2
Re: What do you think? (Yellow Rabbit)

quote:[HR][/HR]Nice lights http://****************.com/smile/emthup.gif http://****************.com/smile/emthup.gif [HR][/HR]​

I agree. http://****************.com/smile/emthup.gif
See less See more
3
Re: What do you think? (85gti1)

The wheels are sitting behind it... its awaiting suspension (should be on by next week... I hope). I've got stock snowflakes for now, looking into a couple other options.
The sunroof bolted right in, I used the complete setup (lid, rails, etc) from an early vw quantum. It was origionally electric, but swapped it over to crank to keep with the "light and simple" theme of the car.
I like bunnies... I'm thinking about throwing away my corrado when I'm done with this thing.
See less See more
Re: What do you think? (sirhcorrado)

what year eurovan did the lights come from? What all do you need to make them work?
Re: What do you think? (85gti1)

Ah, not sure what year, I think it was an 86' or so. As far as I know they're pretty much all the same. I used the existing brackets for the lights, I just had to cut the crap out of them and fab in a few brackets. The wiring was real straight forward too...
Re: What do you think? (sirhcorrado)

The lights look hot! http://****************.com/smile/emthup.gif Me likey.

Anyway to get some close up shots of them? Just wondering about fit and how clean it looks up close.
Thanks
- Peter
See less See more
2
Re: What do you think? (caddy80)

Again, sorry for the picture quality... it was dark.
They fit in pretty well, I just need to fab up a cover for the bottom of the grill (where I took the cutting wheel to it).
Compared to the lights on the vanagon parked next to it, they look pretty good.

* Edit * The fenders aren't quite bolted up all the way yet, so they're a little crooked. I still have some body work to do on them. http://****************.com/smile/emthdown.gif


[Modified by sirhcorrado, 2:05 AM 11-25-2001]
See less See more
3
Re: What do you think? (sirhcorrado)

Sirhcorrado,
Looks great!!!!!!
I like it when people take the high road to modding their cars.
I will definitely be waiting patiently for updates to your projcect.
What bore/stroke are you going with??
Are you going to use the VW 16V head, Oettinger/drake?
Keep us updated

Randy
81 Scirocco S "Mars" - Oettinger 2117cc 16V project (track car)
81 Scirocco S "Cosmos" - Techtonics Tuning 1847cc 8V project (daily driver)
See less See more
Re: What do you think? (Sirocco)

quote:[HR][/HR]
What bore/stroke are you going with??
Are you going to use the VW 16V head, Oettinger/drake?
Keep us updated

[HR][/HR]​
Woah there! That stuff is expensive!
I picked up an ABA block for $100 (in need of a rebuild), and I'm stuffing it under an 84' GTI 1.8 head. Minor porting and polishing, valve job, head studs, shaved pistons or spacer (we'll see how cheap I'm feeling that week), etc... I've got a turbo diesel setup laying around (along with a K26... maybe a hybrid turbo?), but I may go the T3 route. We'll see. I just ordered all my bearings, rings, etc, so we'll take care of that first.
I'd love to spend under $1000 on this car... I think I've got about $600 into it so far.
See less See more
3
Re: What do you think? (sirhcorrado)

Looks darn good to me http://****************.com/smile/emthup.gif
Hope you don't mind if I steal your idea
I promise I'll give you credit if anyone asks

- Peter
See less See more
3
Re: What do you think? (caddy80)

I just have to chime in here and give you props on those headlights. I love them, they remind me of the european Scirocco set-up. Is that what gave you the inspiration?
Re: What do you think? (rabbitmania)

Actually, she was parked next to a vanagon for about a month... thats where the idea came from. Then I saw a picture of a second gen scirocco and said "oh duh."
I was going to do the singe round conversion for the longest time, but I think that round headlights on a square car just doesn't really match (although I know its the way the real german cars were made). It also stemmed from my cheapness, since I could use my old core support (sans a bit of it which I took the cutting wheel to).
Re: What do you think? (caddy80)

quote:[HR][/HR]Looks darn good to me http://****************.com/smile/emthup.gif
Hope you don't mind if I steal your idea
I promise I'll give you credit if anyone asks

- Peter[HR][/HR]​
I dunno about that....
hehe
See less See more
4
Re: What do you think? (sirhcorrado)

hey man I like the lights! Why didnt I think of that?? Haha.
How much work was it? Lemme know because I want something like that on my 83 Jetta
Thanks
Ryan http://****************.com/smile/emthup.gif
See less See more
Re: What do you think? (VWVento67)

Yeah the lights look great. You might be onto something there...
Re: What do you think? (VWVento67)

quote:[HR][/HR]hey man I like the lights! Why didnt I think of that?? Haha.
How much work was it? Lemme know because I want something like that on my 83 Jetta
Thanks
Ryan http://****************.com/smile/emthup.gif [HR][/HR]​
It wasn't too bad, just have to clearance the core support, cut the frick out of the light buckets, and fab a few brackets... it was fun.
See less See more
2
Re: What do you think? (sirhcorrado)

Can you adjust the aim of the lights still?
1 - 20 of 25 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top