What's an "all motor 16v"?
1 - 20 of 44 Posts
Joined
·
3,573 Posts
Re: What's an "all motor 16v"? (mk2jetta)
cause its breathing all on its own, no turbo, supercharger, or N2o..
its the best way to go http://****************.com/smile/emthup.gif
![]()
cause its breathing all on its own, no turbo, supercharger, or N2o..
its the best way to go http://****************.com/smile/emthup.gif
Joined
·
10,111 Posts
Re: What's an "all motor 16v"? (GTX 16v)
![]()
take care,
nashty
quote:[HR][/HR]More like best way to go SLOW!
![]()
[HR][/HR]
give about 6 months. i'll show you all motor slow
[HR][/HR]
take care,
nashty
Re: What's an "all motor 16v"? (mk2jetta)
"so its kind of an other way to say the motor is sporting carbs"
nah just his... they just mean no "unnatural" sources of power.. like dj age one said.
Nice engine BTW, looks like it belongs in a glass case
![]()
[Modified by GTX 16v, 7:32 PM 12-5-2001]
"so its kind of an other way to say the motor is sporting carbs"
nah just his... they just mean no "unnatural" sources of power.. like dj age one said.
Nice engine BTW, looks like it belongs in a glass case
[Modified by GTX 16v, 7:32 PM 12-5-2001]
Re: What's an "all motor 16v"? (mk2jetta)
those arent carbs that the best way to get power out of a 16v jenevy throttle bodys and programable injection
BTW that engine is way cool i am building one just like it
what did you put on the inside (rods pistons crank valves cams ) http://****************.com/smile/emthup.gif http://****************.com/smile/emthup.gif http://****************.com/smile/emthup.gif http://****************.com/smile/emthup.gif http://****************.com/smile/emthup.gif http://****************.com/smile/emthup.gif
N/A is the best way
by the way all of the VW racing engines used in the SEAT rally car and the SKODA rally cars are not 20v the the all mighty 16V
those arent carbs that the best way to get power out of a 16v jenevy throttle bodys and programable injection
BTW that engine is way cool i am building one just like it
what did you put on the inside (rods pistons crank valves cams ) http://****************.com/smile/emthup.gif http://****************.com/smile/emthup.gif http://****************.com/smile/emthup.gif http://****************.com/smile/emthup.gif http://****************.com/smile/emthup.gif http://****************.com/smile/emthup.gif
N/A is the best way
by the way all of the VW racing engines used in the SEAT rally car and the SKODA rally cars are not 20v the the all mighty 16V
Re: What's an "all motor 16v"? (marsrocco)
any of y'all spotted the 87 gti 16v on throttle bodys at this year's Waterfest? it came in 4th. anyways........that engine is as clean as a chirurgical scalpel, i went to his house on monday, his engine is taken out to work on this winter http://****************.com/smile/emthup.gif http://****************.com/smile/emthup.gif http://****************.com/smile/emthup.gif
any of y'all spotted the 87 gti 16v on throttle bodys at this year's Waterfest? it came in 4th. anyways........that engine is as clean as a chirurgical scalpel, i went to his house on monday, his engine is taken out to work on this winter http://****************.com/smile/emthup.gif http://****************.com/smile/emthup.gif http://****************.com/smile/emthup.gif
Re: What's an "all motor 16v"? (Bob Opla)
BTW, you already took out those TT valve springs, right?
quote:[HR][/HR]Drew you better clean out your TB's before you start that motor up. Might have a squirrel family living in there.[HR][/HR]
ROFL! He's right, droo! BTW, you already took out those TT valve springs, right?
Re: What's an "all motor 16v"? (respectVW)
Specs for those who havent seen em (in no particular order except as I can remember em)
83.5mm 11/1 forged JE pistons
ARP fasteners
1.8L P&P cc-ed head
Schrick 260/276 cams
Schrick hi rev springs
Autotech Titanium retainers
Badger5 throttlebodies
RC Engineering 340cc balanced injectors
Nology Hotwires
Kent gear and belt
9A block - balanced internals (+/- 1gm)
VWMS windage tray
schrick oilpan
velocity lightened balanced flywheel
Centerforce dual friction clutch
Unorthodox underdrive pulleys
and a whole bunch of other ****e Im sure...been sitting for so long I forget whats even in it
Specs for those who havent seen em (in no particular order except as I can remember em)
83.5mm 11/1 forged JE pistons
ARP fasteners
1.8L P&P cc-ed head
Schrick 260/276 cams
Schrick hi rev springs
Autotech Titanium retainers
Badger5 throttlebodies
RC Engineering 340cc balanced injectors
Nology Hotwires
Kent gear and belt
9A block - balanced internals (+/- 1gm)
VWMS windage tray
schrick oilpan
velocity lightened balanced flywheel
Centerforce dual friction clutch
Unorthodox underdrive pulleys
and a whole bunch of other ****e Im sure...been sitting for so long I forget whats even in it
2006 P+ A4 3.2 Avant, 2011 C'Dale Bad Boy, 2014 C'Dale Carbon Synapse, 2019 P+ Q5
Joined
·
41,531 Posts
Re: What's an "all motor 16v"? (2035cc16v)
![]()
quote:[HR][/HR]
83.5mm 11/1 forged JE pistons
ARP fasteners
1.8L P&P cc-ed head
Schrick 260/276 cams
Schrick hi rev springs
Autotech Titanium retainers
Badger5 throttlebodies
RC Engineering 340cc balanced injectors
Nology Hotwires
Kent gear and belt
9A block - balanced internals (+/- 1gm)
VWMS windage tray
schrick oilpan
velocity lightened balanced flywheel
Centerforce dual friction clutch
Unorthodox underdrive pulleys
[HR][/HR]
and a Partridge in a Pear Tree (hopefully not Danny Partridge)83.5mm 11/1 forged JE pistons
ARP fasteners
1.8L P&P cc-ed head
Schrick 260/276 cams
Schrick hi rev springs
Autotech Titanium retainers
Badger5 throttlebodies
RC Engineering 340cc balanced injectors
Nology Hotwires
Kent gear and belt
9A block - balanced internals (+/- 1gm)
VWMS windage tray
schrick oilpan
velocity lightened balanced flywheel
Centerforce dual friction clutch
Unorthodox underdrive pulleys
[HR][/HR]
Joined
·
1,411 Posts
Re: What's an "all motor 16v"? (2035cc16v)
Drew,
How big of a difference will Ti retainers make in a 16v head. I am running the 268/276 cam combo. Red line will be close to 8000 rpm. At that rpm range, I would think the Ti retainer would really help since they are so much lighter. Any insight would be great.
Patrick
Drew,
How big of a difference will Ti retainers make in a 16v head. I am running the 268/276 cam combo. Red line will be close to 8000 rpm. At that rpm range, I would think the Ti retainer would really help since they are so much lighter. Any insight would be great.
Patrick
1 - 20 of 44 Posts
Join the discussion
