VW Vortex - Volkswagen Forum banner

when you put a chip in...

574 Views 9 Replies 8 Participants Last post by  BadAssCorrado
what do you have to do to get everything to read each other correctly?
i know you have to let it sit in the on position for x amount of minutes. then let it run for another x amount of minuts. but what is the x amount of time for each? thanx
1 - 10 of 10 Posts
Re: when you put a chip in... (sanity29)

Turn it to the 2 position and leave it for about 10 - 15 minutes, then start it up and let it run until your fans come on, then go!
You probably won't feel any difference for at least 2 days.
- Jack
Re: when you put a chip in... (NeedSLCBad)

5 cold starts.
Re: when you put a chip in... (vdubjb)

never heard of this before...just a vr6 thing?
Re: when you put a chip in... (BLUE NRG)

perhaps., or a giac thing
Re: when you put a chip in... (vdubjb)

In my G60 i felt the difference the 1st time i took my car for a spin with the new chip
Re: when you put a chip in... (N'Syncro)

quote:[HR][/HR]In my G60 i felt the difference the 1st time i took my car for a spin with the new chip[HR][/HR]​
Ditto!
Re: when you put a chip in... (N'Syncro)

It may vary, I'm not an expert by any means, but when I put the GIAC in my VR6, it took about 2 days of driving for it to "kick in"
- Jack
Re: when you put a chip in... (NeedSLCBad)

I plugged a 2 in for the variable "x" and my car ran different immediatly after put it in. AMS and GIAC
Re: when you put a chip in... (NeedSLCBad)

quote:[HR][/HR]It may vary, I'm not an expert by any means, but when I put the GIAC in my VR6, it took about 2 days of driving for it to "kick in"
- Jack[HR][/HR]​
Yup me too. Same with my P-chip.
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top