VW Vortex - Volkswagen Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
8 Posts
Discussion Starter · #1 ·
Getting ready to swap the tranny, there is just one issue before i start....

The transmissions seem to be the same except for the wire plug on top. the one in the car now has just two wires plugged into what looks like a sensor on top.
On the tranny i want to put in, instead of the two wire plug, there is a plug that has five spades.

so what are these wires? can i just bypass them? if i knew what the five spades are on the "new" one i could wire the two to the right ones, maybe?

Ive searched this forum and the manual and cant find answers.

the code stamped on my existing tranny is AWY 14030, the code on the "new" on is AGS (i think its an S) 07124. both are 020 for 5 speed.

hope that all makes sense, i can post pictures if need be.
 

·
Registered
Joined
·
3,697 Posts
reverse light switch.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top