[CL_VR6]

pretty much everything is finished except for cosmetic work, the motor starts up and funs fine but the cluster doesn't work RPM & warning lights, it lights up (backlight, KM, time) work but the other stuff doesn't tried my old 2.0 cluster same thing, i used all the vr6 wires including cluster wires. anyone have any clues?

 

[Big Dac With Fries]

Re: need help, OBD2 VR6 conversion into 96 cl (CL_VR6)

Don't....eat....the....cluuuuues.
Maybe check the hybrid forum?
- dac

 

[soso]

Re: need help, OBD2 VR6 conversion into 96 cl (Big Dac With Fries)

your using a vr6 cluster correct?, if not go get one.

 

[CL_VR6]

using VR6 cluster, cluster wires, fuse box

 

[CL_VR6]

ttt

 

[ric302]

Re: (CL_VR6)

Iam having the same problem i took my cluster out followed the wireing from the cluster to the fuse box i found 4 wirers that are not hooked up,but i still dont know where they go

 

[chaoticvr6]

Re: (ric302)

Quote, originally posted by ric302 »

Iam having the same problem i took my cluster out followed the wireing from the cluster to the fuse box i found 4 wirers that are not hooked up,but i still dont know where they go

Bentley is your friend.

 

[CL_VR6]

anyone have wire schematic? by the time i order the manual and get it..... i could be driving the car...

 

[bad_vr_vento]

Re: (CL_VR6)

there is usually one wire that everyone forgets to connect
vehicle speed sensor or engine speed sensor
look that up